PL 2022 08 DRS-FLOOR

1 Dr. Schulze GmbH Bollenberg 10 D-57234 Wilnsdorf Tel. +49 (0) 27 37 59 53-0 E-Mail: [email protected] www.dr-schulze.de | www.drs-floor.com Version 01/2022 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. DR. SCHULZE GMBH presents DRS-FLOOR® SURFACE ENGINEERING SOLUTIONS FOR INDUSTRIAL AND COMMERCIAL CONCRETE FLOORING PAGE DRS-FLOOR® Lithium Concrete Treatments 02 - 03 Floor Treatment Equipment 04 Testing Equipment and Tools 05 Product Navigator / Application Chart 06 - 07 Multi-Disc Grinding / Polishing Machines 08 - 10 DBS-820-4H RIDER 11 DBS-300 VARIO 12 Single-Disc Grinding Machines 13 Universal Single-Disc Machines 14 DRS-MILL: Innovative Floor Milling Technology 15 PCD-Milling Tools 16 Grinding Tools with Metal Bond 17 Polishing Tools with Resin Bond 18 Polishing Pads 19 Hand Machines 20 Tools for Hand Machines 21 Floor Milling Machines / Scarifiers 22-23 Tools for Floor Milling Machines / Scarifiers 24 Dust Separators 25 Air Filter Systems 26 - 27 DRS-FLOOR® Special Solutions 28 VISIT OUR WEBSITE: WWW.DRS-FLOOR.COM CONTENT

2 DRS-FLOOR® LITHIUM Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. DR. SCHULZE GMBH PRESENTS A FULL RANGE OF LITHIUM-BASED CHEMICALS FOR CONCRETE TREATMENT AND MAINTENANCE TO BE APPLIED IN: - production facilities - warehouses and storage buildings - car parkings - aviation hangars - freight terminals - hospitals and medical facilities - food industry estates - shopping malls - cinemas, schools, shops - hotels, offices - entrance halls, stairs - living premises Advantages of DRS-FLOOR® LITHIUM against sodium and potassium: - smallest atom size - lowest viscosity - lowest alkalinity (slow and consistent reaction between lithium densifier and concrete) - penetrates deep into the concrete - creates thick, hard and resistant layer on the concrete surface - doesn´t enter any reaction with water - doesn´t form salt debris after application or after contact with water - doesn´t require any salt cleaning procedure after application Functions of DRS-FLOOR® concrete treatments: - hardens the structure of the concrete - protects the surface against wear - increases the impact and compressive strength of concrete - increases water, stain and chemical repellence - makes surface easy-to-clean - improves the natural appearance - prevents dusting of the surface - decreases risk of micro-cracking DRS-FLOOR® LITHIUM CONCRETE TREATMENTS

3 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. Chemical Hardener Product is ready to Apply Do Not Take Internally Non Flammable Non Hazardous 25 L Total Weight: 28 Kg Health............................. 1 Flammability................... 0 Reactivity........................ 0 Protection....................... C V.O.C. Content:.............. 0 g/l EN 1504-2 Factory I D-57234 Wilnsdorf Tel.: +49 (0) 27 37 59 53-0 Bollenberg 10 Fax: +49 (0) 27 37 59 53-3 Germany www.dr-schulze.de [email protected] DRS-FLOOR-CM Concrete Hardener + Densifier + Salt Protection + Sealer Chemical Hardener Product is ready to Apply Do Not Take Internally Non Flammable Non Hazardous 25 L Total Weight: 28 Kg Health............................. 1 Flammability................... 0 Reactivity........................ 0 Protection....................... C V.O.C. Content:.............. 0 g/l EN 1504-2 Factory I D-57234 Wilnsdorf Tel.: +49 (0) 27 37 59 53-0 Bollenberg 10 Fax: +49 (0) 27 37 59 53-3 Germany www.dr-schulze.de [email protected] DRS-FLOOR-HDS Concrete Hardener + Densifier + Sealer Chemical Hardener Product is ready to Apply Do Not Take Internally Non Flammable Non Hazardous 25 L Total Weight: 28 Kg Health............................. 1 Flammability................... 0 Reactivity........................ 0 Protection....................... C V.O.C. Content:.............. 0 g/l EN 1504-2 Factory I D-57234 Wilnsdorf Tel.: +49 (0) 27 37 59 53-0 Bollenberg 10 Fax: +49 (0) 27 37 59 53-3 Germany www.dr-schulze.de [email protected] DRS-FLOOR-SR Concrete Surface Repair + Pore Filler Chemical Hardener Product is ready to Apply Do Not Take Internally Non Flammable Non Hazardous 25 L Total Weight: 28 Kg Health............................. 1 Flammability................... 0 Reactivity........................ 0 Protection....................... C V.O.C. Content:.............. 0 g/l EN 1504-2 Factory I D-57234 Wilnsdorf Tel.: +49 (0) 27 37 59 53-0 Bollenberg 10 Fax: +49 (0) 27 37 59 53-3 Germany www.dr-schulze.de [email protected] DRS-FLOOR HDS+ Concrete Hardener + Densifier + Salt Protection + Sealer Chemical Hardener Product is ready to Apply Do Not Take Internally Non Flammable Non Hazardous 25 L Total Weight: 28 Kg Health............................. 1 Flammability................... 0 Reactivity........................ 0 Protection....................... C V.O.C. Content:.............. 0 g/l EN 1504-2 Factory I D-57234 Wilnsdorf Tel.: +49 (0) 27 37 59 53-0 Bollenberg 10 Fax: +49 (0) 27 37 59 53-3 Germany www.dr-schulze.de [email protected] DRS-FLOOR HDSP Concrete Sealer + Polish + Hardener + Densifier Chemical Hardener Product is ready to Apply Do Not Take Internally Non Flammable Non Hazardous 25 L Total Weight: 28 Kg Health............................. 1 Flammability................... 0 Reactivity........................ 0 Protection....................... C V.O.C. Content:.............. 0 g/l EN 1504-2 Factory I D-57234 Wilnsdorf Tel.: +49 (0) 27 37 59 53-0 Bollenberg 10 Fax: +49 (0) 27 37 59 53-3 Germany www.dr-schulze.de [email protected] DRS-FLOOR-HDSP EXT Concrete Hardener + Densifier + Salt Protection + Sealer Chemical Hardener Product is ready to Apply Do Not Take Internally Non Flammable Non Hazardous 25 L Total Weight: 28 Kg Health............................. 1 Flammability................... 0 Reactivity........................ 0 Protection....................... C V.O.C. Content:.............. 0 g/l EN 1504-2 Factory I D-57234 Wilnsdorf Tel.: +49 (0) 27 37 59 53-0 Bollenberg 10 Fax: +49 (0) 27 37 59 53-3 Germany www.dr-schulze.de [email protected] DRS-FLOOR-CT Concrete Transparent Color DRS-FLOOR CM CURING-MEMBRANE DRS-FLOOR CM is a paraffinic water-based compound, that fulfills and surpasses the requirements of ASTM C-309 „Liquid Membrane – Forming Compounds for Curing Concrete” moisture retention requirements. DRS-FLOOR CM is to be directly applied on fresh casted concrete or screed. It creates on the surface a clear membrane and prevents the water evaporation from the surface, which ensures an increased concrete strength as well as a considerably reduced tendency to crack formation. DRS-FLOOR SR SURFACE REPAIR + PORE FILLER DRS-FLOOR SR is a concrete pore and micro-crack filler with densifying function, which compounds with the grinding dust and penetrates into the concrete surface. By reacting chemically with the concrete, DRS-FLOOR SR forms a clear, dense, durable and hard inorganic topical surface and seals the open pores and other small defects for radical improvement of stain resistance and optical appearance DRS-FLOOR HDS HARDENER + DENSIFIER + SEALER DRS-FLOOR HDS is an advanced concrete lithium-based densifier for easy single-coat application and requires no water rinsing after treatment. When sprayed it forms an extremely hard, stain resistant, dense and protective surface layer which is breathable and abrasion resistant. This multifunctional hardener, sealer, densifier creates a stronger, more impenetrable and better-looking finish (satin-glossy) that is dustproof and resistant to staining and deterioration. DRS-FLOOR HDS can be applied on old or fresh concrete, on floors and walls. DRS-FLOOR HDS+ HARDENER + DENSIFIER + SALT PROTECTION + SEALER DRS-FLOOR HDS+ provides all the protection of the DRS-FLOOR HDS with an additional sealing function against salts and penetrating water. It hardens, seals and densifies concrete and masonry surfaces generating a salt ion screen and water repellent characteristic even through regular maintenance, de-icing, pressure washing, pedestrian and traffic wear. It also protects and enhances the appearance of interior and exterior decorative polished concrete. DRS-FLOOR HDSP SEALER + POLISH + HARDENER + DENSIFIER DRS-FLOOR HDSP is a high-performance industrial flooring protective clear coating, which hardens and seals concrete floors, producing a very hard, dust repellent, chemical resistant, maintenance-friendly and water tight surface. DRS-FLOOR HDSP is the optimum coating system for high-demand commercial and industrial premises - whether the surface must tolerate significant foot traffic, large equipment, abrasion or chemicals DRS-FLOOR HDSP ensures high durability and bond strength, ability to withstand UV, stains, chemical spills and heavy traffic. DRS-FLOOR HDSP provides rapid curing, attractive clear glossy finish and easy application for facilities, which require maximum protection and no shutdown. After application the surface is accessible within less than 1 hour and can take the full load after only 24 hours. DRS-FLOOR HDSP EXT SEALER + POLISH FOR EXTERIOR APPLICATION The function and application of DRS-FLOOR HDSP EXT correspond so far to those of DRS-FLOOR HDSP however the HDSP EXT ensures the ability to withstand UV and frost and therefore is suitable for outdoor applications for protection of various concrete surfaces, concrete products, masonry, slate as well as some kinds of natural stone. Surface treated with DRS-FLOOR HDSP EXT gets a permanent wet gloss, provides excellent water and stain resistance and increased wear protection. Furthermore the surface becomes easy to clean and to maintain without any after-treatment. DRS-FLOOR CT COLOR TRANSPARENT DRS-FLOOR CT is a unique lithium-based semi-transparent paint designed to provide industrial strength performance and an attractive finish for interior concrete. This durable penetrating color sealer hardens, dust proofs and protects the surface against UV and staining while providing a satin or a gloss finish. Nine standard colours available - customized colours on request. DRS-FLOOR® LITHIUM CONCRETE TREATMENTS

4 ACA-920 Working width [mm] 920 Voltage [V] 230 Operating time [hours] 5 - 7 Dimensions LxWxH [mm] 920x800x700 Weight [kg] 25 Price [€] 4.800,00 Spare mop [€] 88,00 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. Automatic chemical applicator ACA-920 - for automatic dispersing of DRS-FLOOR® chemical concrete treatments - much better equality of chemical´s dispersion - performance up to 2.000 m²/hour !!! - material (chemicals) saving up to 30% !!! - labor saving up to 70% !!! - the fluid flow stops automatically during applicator´s stop, shunting or moving in wrong direction - stepless adjustable build-in pump - portable, lightweight and easy to clean - built-in charger with a battery run time of 5 - 7 hours Telescopic fibre mop 1150-1860 mm for application of DRS-FLOOR® chemical treatments Telescopic fibre mop 1150-1860 mm Price Telescopic handle [€] 42,00 40 cm mop holder [€] 38,00 90 cm mop holder [€] 82,00 120 cm mop holder [€] 98,00 Micro fiber mops 40 cm (10 pcs.) [€] 186,00 Micro fiber mops 90 cm (10 pcs.) [€] 320,00 Micro fiber mops 120 cm (10 pcs.) [€] 592,00 FLOOR TREATMENT EQUIPMENT

5 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. For visualization of different design options we offer a variety of different specimens, which differ by the following characteristics: For testing of compressive strength of concrete and consisting of a spring-loaded pin, which hits with defined and constant impact energy on the concrete surface. The indicated rebound number can be converted by using a correlation table into the compressive strength of the concrete. For testing of gloss level for various surfaces. The battery-powered device is simply to be put on the surface and the gloss number can be read immediately on the illuminated display. - materials (concrete, screeds) - various grinding and polishing processes - stage of aggregate‘s exposing grade - different treatments with DRS-FLOOR® concrete care products - improvement of the surface quality by pore filling - surface colouring Various specifications, customized specimens and prices on request. - non destructive testing - can be used in accordance to following norms: ASTM C805, EN 12504-2, BS 1881:202, DIN 1048, ISO 8045, NFP18-417, UNI 9189 - statement about the concrete strength within a few seconds - mobile applicable - scope of delivery: case, grinding stone, calibration certificate, instruction manual - fully automatic measurement in seconds - long battery life - integrated calibration mode - illuminated, easy-to-read display - can be used for different materials (stone, metal, paper, wood, paints etc.) - scope of delivery: case, two calibration specimens, electric charger DRS-FLOOR® Concrete specimens 10x10 cm Mechanical concrete test hammer MBPH Automatic gloss meter AGM Concrete test hammer MBPH Impact energy [Nm] 2207 Measuring range [MPa] ≈ 20-70 Weight [kg] 1,5 Price [€] 890,00 Gloss meter AGM Display range 0-199 Measuring surface [mm] 9x18 Weight [kg] 0,2 Price [€] 780,00 TESTING EQUIPMENT AND TOOLS

6 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. Machine Page Milling of concrete Removal of coatings Grinding of concrete, Terrazzo DBF-200-E230 DBF-200-E400 DBF-200-B 22 HM5-45/6 HM6-45/6 HM8-45/6 SL-42/2 24 24 24 24 SR-40/11 SR-40/22 SL-42/2 24 24 24 DBF-250-E400 DBF-250-B DBF-250-TWIN 22, 23 HM6-57/6 HM8-57/6 24 24 SR-57/19 24 DBF-380 23 HM8-80/8 HM12-80/8 SM-TS-280-B 24 24 23 HM8-80/8 SR-80/19 SR-80/39 24 24 24 CT43+ 14 DBB-700 14 DBS-250 13 PCD-Xpert-1R L PCD-Xpert-1H L GS-PCD-R GS-PCD-H 16 16 16 16 DRS-3DP DRS-2DS 2DS-U..X 17 17 17 DBS-300 Vario 12 PCD-Xpert-1R PCD-Xpert-1H GS-PCD-R GS-PCD-H 16 16 16 16 RAZOR-C DRS-3DP DRS-2DS 2DS-U..X 17 17 17 17 DBS-400 13 PCD-Xpert-1R PCD-Xpert-1H GS-PCD-R GS-PCD-H 16 16 16 16 RAZOR-C DRS-3DP DRS-2DS 2DS-U..X 17 17 17 17 DBS-500-3H 8 (RAZOR-C) 2 (DRS-3DP) 2 (DRS-2DS) 2 (2DS-U..X) 2 17 17 17 17 DBS-520-3H 8 PCD-Xpert-1R PCD-Xpert-2R PCD-Xpert-1H PCD-Xpert-2H 16 16 16 16 RAZOR-C DRS-3DP DRS-2DS 17 17 17 DBS-620-4H DBS-820-3H DBS-820-4H DBS-820-4H RIDER 9, 10, 11 PCD-Xpert-2R PCD-Xpert-2H 16 16 RAZOR-C DRS-3DP DRS-2DS 17 17 17 1 not suitable for all applications. Should be approved on a small test surface 2 only for easy grinding and polishing jobs on flat surfaces PRODUCT NAVIGATOR

7 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. Grinding of natural stone Polishing of concrete, Terrazzo Polishing of natural stone Surface cleaning SL-42/2 24 DRS-Clean-N-PAD DRS-Clean-S-PAD 19 19 DRS-Clean-N-PAD DRS-Clean-S-PAD 19 19 DRS-Clean-N-PAD DRS-Clean-S-PAD 19 19 DRS-Clean-S-PAD DRS-HiSpeed-PAD 19 19 DRS-Clean-S-PAD DRS-HiSpeed-PAD 19 19 DRS-Clean-S-PAD DRS-HiSpeed-PAD 19 19 DRS-HiSpeed-PAD DRS-Shine-PAD 19 19 (DRS-HiSpeed-PAD)1 (DRS-Shine-PAD)1 19 19 DRS-HiSpeed-PAD DRS-Shine-PAD 19 19 (DRS-2DS) 1 DRS-ShineMasterConcrete50#-3000# DRS-HybridMaster 50#-3000# DRS-CeramMaster 50#-200# 18 18 18 on request (DRS-2DS) 2 17 DRS-ShineMasterConcrete50#-3000# DRS-HybridMaster 50#-3000# DRS-CeramMaster 50#-200# 18 18 18 on request DRS-2DS 17 DRS-ShineMasterConcrete50#-3000# DRS-HybridMaster 50#-3000# DRS-CeramMaster 50#-200# 18 18 18 on request DRS-2DS 17 DRS-ShineMasterConcrete50#-3000# DRS-HybridMaster 50#-3000# DRS-CeramMaster 50#-200# 18 18 18 on request 17 Surface quality Performance / size of the project Removal rate PRODUCT NAVIGATOR

8 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. DBS-500-3H DBS-520-3H innovative 4,0 kW / 230 V three-discs grinding machine with high performance planetary gear transmission and variable rotation speed for polishing and easy grinding jobs on even surfaces. To the further features of DBS-500-3H belong foldable weights and LED-spotlight for optimal grinding performance on every surface. The machine is dismountable in two parts within a few minutes for easy transportation. innovative high performance 7,5 kW / 400 V three-discs grinding machine with high performance planetary gear transmission and variable rotation speed for various applications on diverse hard, even stone floors DBS-500-3H DBS-520-3H DBS-620-4H Motor 4,0 kW / 230 V 7,5 kW / 400 V 7,5 kW / 400 V Grinding width [mm] 500 500 600 Quantity of grinding heads / diamond tools [pcs.] 3 / 9 3 / 9 4 / 12 Water tank [l] 20 30 30 Rotation speed [min-1] 0-400 0-300 - Rotation speed of satellites [min-1] 0-1800 0-1800 0-1200 Ø-vacuum connection [mm] 50 70 70 Length [mm] 1340 1510 1470 Width [mm] 520 540 660 Height [mm] 1120 1120 1120 Weight [kg] 220 240 340 Price [€] 7.190,00 6.590,00 9.290,00 Adapter-set for resin tools [€] 180,00 1 180,00 1 240,00 2 1 set consists of 9 quick release adapter plates AV-520 Ø80 mm with Velcro 2 set consist of 12 quick release adapter plates AV-620 Ø100 mm with Velcro MULTI-DISC GRINDING / POLISHING MACHINES 1 3 4 8 7 10 6 5 9 9 13 13, 14, 15 15 14 2 2 5 7

9 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. DBS-620-4H innovative extremely powerful 7,5 kW / 400 V four-discs grinding machine with high-class gear transmission and variable rotation speed for large projects on uneven surfaces of soft and hard floors Due to replacement of a common belt drive by high performance gear transmission our grinding machines are characterized by smoother running, higher load capacity as well as less noise emission and are nearly maintenance free! 1 CNC machined gear box made of high quality aluminum alloy 2 high performance gear transmission with high-class gear wheels made of special steel alloy for highest capacity and long lifetime 3 always optimal machine position towards the surface due to flexible fixation of the grinding head 4 height-adjustable handle 5 rotation speed continuously adjustable due to high performance frequency converter 6 remarkably stable and lightweight water tank grace to centrifugal casting process 7 LED-display 8 control panel with emergency stop function 9 connection for industrial vacuum cleaner for dust-free operation 10 comfortable control of water flow 11 easy removable support wheel for adjustment of contact pressure (DBS-620-4H) 12 stepless adjustment of contact pressure by special pressure balance system (DBS-620-4H) 13 elastically mounted grinding heads reduce vibrations and upgrade the surface quality 14 combi-plate for mounting of metal and resin bonded tools 15 DRS-LOCK fixing system for grinding tools MULTI-DISC GRINDING / POLISHING MACHINES General technical features 11 13, 14 15 12 2 6 4 8 5 10 7 9 9 1 3

10 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. DBS-820-4H EV DBS-820-3H DBS-820-4H DBS-820-3H DBS-820-4H DBS-820-3H REMOTE DBS-820-4H EV Motor 11 kW / 400 V 11 kW / 400 V 11 kW / 400 V 11 kW / 400 V Grinding width [mm] 780 780 780 780 Quantity of grinding heads / diamond tools [pcs.] 3/9 (3/181) 4/12 (4/241) 3/9 (3/181) 4/12 (4/241) Water tank [l] 30 30 10 30 Rotation speed [min-1] 0-180 0-110 0-180 0-110 Rotation speed of satellites [min-1] 0-850 0-850 0-850 0-850 Ø-vacuum connection [mm] 70 70 70 70 Length [mm] 2300 2300 2300 2300 Width [mm] 800 800 800 800 Height [mm] 1500 1500 1500 1500 Weight [kg] 480 500 530 530 Price [€] 18.990,00 20.990,00 30.990,00 22.990,00 Adapter-set for resin tools [€] 180,00 (9 pcs.) 240,00 (12 pcs.) 180,00 (9 pcs.) 240,00 (12 pcs.) 1 optionaly DBS-820-3H / DBS-820-4H / DBS-820-3H REMOTE / DBS-820-4H EV Innovative and high performance 11 kW / 400 V multi-disc grinding machine with high-performance planetary gear transmission and wireless remote control (only DBS-820-3H REMOTE) or electric feed motion (only DBS-820-4H EV) for extra large projects. DBS-820-3H 3 planetary heads optimal for perfect quality of even floors DBS-820-4H 4 planetary heads optimal for smoothing of uneven floors MULTI-DISC GRINDING / POLISHING MACHINES General technical features - CNC-machined gear box made of high quality aluminium alloy - high performance planetary gear transmission with gear wheels made of special steel alloy for highest capacity and long lifetime - always optimal and consistent tool pressure on the surface due to flexible fixation of the grinding head - height-adjustable handle - rotation speed continuously adjustable due to high performance frequency converter - remarkably stable and lightweight water tank produced by centrifugal casting process - LED-Display - control panel with emergency stop button - double-sides connection for industrial vacuum cleaner for dust-free operation - comfortable adjustment of water flow - tiltable support wheel for adjustment of grinding pressure - stepless electrical adjustment of grinding pressure - elastically mounted grinding heads reduce vibrations and upgrade the surface quality - universal tool holder for mounting of metal and resin tools - DRS-LOCK fixing system for grinding tools - wireless remote control for all main machine functions (only DBS-820-3H REMOTE) - NEW: DBS-820-4H EV with electric feed motion including travel direction correction and comfortable joystick control Control panel of DBS-820-4H EV Remote control of DBS-820-3H REMOTE

11 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. General technical features - CNC-machined high-performance planetary gear box made of high-quality aluminum alloy with gear wheels made of special steel for maximum load capacity and long lifetime - front wheel with electro-mechanical drive for adjustment of the grinding pressure and for easy transportation - hydraulic lift system for comfortable replacement of grinding tools - integrated battery supplies all important machine functions (including lifting for tool replacement) for easy machine transport even without power connection - CNC machined control panel with all main functions and emergency stop button - comfortable control of the machine by joystick - steady constant position of the machine to the floor due to flexible fixation of the grinding head - stepless adjustment of the grinding speed through a high-performance frequency converter - movable additional weights for adjustment of the grinding pressure - LED lighting of the working area for comfortable operation - height-adjustable handle for manual grinding - double-sided connection for industrial vacuum cleaners for dust-free operation - flexible mounted tool holders reduce vibration and upgrade surface quality - universal tool holder for mounting of PCD, metal and resin bonded tools - DRS-LOCK - tool-free fastening system for grinding tools DBS-820-4H RIDER Motor 15 kW / 400 Volt / 32 A Grinding width [mm] 780 Number of grinding heads / grinding tools [pcs.] 4/24 Rotation speed main plate [min-1] 0-300 Rotation speed satellites [min-1] 0-1200 Length / transport length [mm] 2400 / 1600 Width / transport width [mm] 900 / 900 Height / transport height [mm] 1450 / 1200 Weight [kg] 730 Price [€] 49.990,00 Adapter set for polishing tools [€] 480,00 (24 pcs.) DBS-820-4H RIDER With this new ride-on grinding machine every demanding grinding job can be completed fatigue-free in shortest time. The DBS-820-4H RIDER is based on the proven planetary gear transmission of the DBS-820 series and sets benchmarks in terms of efficiency, easiness of operation and surface quality, especially for large projects. DBS-820-4H RIDER

12 This innovative grinding machine is optimally suited for the effective processing of small and medium sized areas as well as for corner processing along the walls. Due to its continuously variable grinding speed through an integrated frequency converter, the DBS-300 Vario can be used with all types of grinding tools: PCD milling tools, metal bonded grinding shoes and resin bonded polishing pads. General technical features Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. - grinding head swivels to the both sides and allows almost borderless grinding along the walls - flexibly mounted dust protection cover with removable front segment and two support rollers ensures dust-free operation - electrical grinding head height adjustment for modulation of the grinding angle - depending on the adjusted height of the grinding head, the machine‘s balance changes and pulls the grinding head to left or right, so that the grinding tools come even closer to the wall - integrated frequency converter for stepless adjustment of the grinding speed allows optimal use of various grinding tools - can be dismantled in 2 parts (56 and 77 kg) within minutes for easy transport on construction sites without elevator or crane - LED display with digital amperemeter for control of the operating status and for avoiding of overloads - flexible cardan mounted tool holder reduces vibrations and compensates floor unevenesses - foldable handle for easy and comfortable transport - stepless height adjustment of the handle - comfortable control panel with all main functions, LED display and emergency stop button - integrated water tank with control valve for wet grinding - brush seal and large dimensioned industrial vacuum cleaner connection for dust-free operation - LED lighting of the working area for comfortable operation - DRS-LOCK - tool free fastening system for all PCD, DRS-2DS and resin bonded tools (ShineMaster, HybridMaster, CeramMaster) NEW VERSION NEW VERSION DBS-300 Vario DBS-300 VARIO DBS-300 Vario Motor 4,0 kW; 230 Volt; 16 A Grinding width [mm] 300 Number of grinding heads / grinding tools [pcs.] 1/4 Ø-vacuum cleaner connection [mm] 50 Rotation speed [min-1] 0-1200 Length [mm] 1600 Width [mm] 500 Height [mm] 1060 Weight [kg] 133 Transport weight [kg] 56 +77 Price [€] 5.490,00 Adapter set for polishing tools [€] 80,00 (4 pcs.)

13 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. General technical features General technical features General technical features DRS-250-20DS-C40 DRS-250-20DS-A40 DRS-250-PCD for hard concrete for abrasive concrete and screeds - DRS-250-20DS-C40/A40 with 20 high- performance diamond segments 40x10x10 mm - DRS-250-PCD with 10 high-strength semi- circular PCD picks and 10 support segments 40x10x6 mm - adapted segment specification for optimal performance - DRS-250-20DS-C40/A40 can be used for smooth removal of coatings up to 2-3 mm - DRS-250-PCD for effective removal of thicker coatings - compatible with most common grinders Ø250 mm - optimally designed for our DBS-250 floor grinder Price [€] DRS-250-20DS-C40 290,00 DRS-250-20DS-A40 290,00 DRS-250-PCD 384,00 DBS-400 DBS-250 Powerful, robust and simple in use single disc machine for grinding of miscellaneous surfaces. Suitable for grinding of terrazzo and concrete as well as for removing epoxy adhesives, paints and pollutions. Also suitable for wet grinding. for effective removal of coatings Light, handy and powerful grinding machine with 230V power connection for wet and dry grinding of various stone floors. - easy to operate - dust extraction outlet for dust-free processing - with water connection for wet grinding - exceeding grinding performance - powder-coated components - incl. grinding base plate for mounting of 3 or 6 diamond or PCD tools - DRS-LOCK fixing system for grinding tools (3 or 6 DRS-LOCK grinding tools) DBS-250 DBS-400 Grinding width [mm] 250 400 Motor 2,2 kW, 230 V 4 kW, 400 V Rotation speed [min-1] 1410 1070 Ø-vacuum connection [mm] 50 70 Length [mm] 800 1350 Width machine / handle [mm] 420 410/730 Height [mm] 860 1000 Weight [kg] 60 100 Price incl. diamond tool set1 [€] 1690,001 2.990,002 Velcro holder for fixation of polishing PADs [€] 160,00 - 1 4 pcs. diamond grinding tools 2DS-U..X 2 3 pcs. diamond grinding tools DRS-2DS or DRS-3DP - elastic tool fixing system for reduction of vibrations and compensation of ground unevennesses - excentric adjustment system for setting of grinding angle - integrated spirit level for precise leveling - foldable handle for transport - stepless adjustment of the handle‘s working height - easily reachable emergency stop button - tiltable grinding head for grinding close to the walls - removable protection cover for grinding in corners - water connection for wet grinding - brush seal ring and large vacuum cleaner connection for dust-free grinding - DRS-LOCK fixing system for grinding tools (4 DRS-LOCK grinding tools) DRS-LOCK fixing system for grinding tools DRS-LOCK fixing system for grinding tools rotatable grinding head for grinding in corners for effective grinding and roughening of concrete SINGLE-DISC GRINDING MACHINES DRS-250-20DS-C40 DRS-250-PCD DRS-250-20DS-A40

14 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. DBB-700 / BURNISHER High-speed polishing machine 7,5 kW / 400 V with stepless adjustable rotation speed of up to 2500 min-1 for extreme daily outputs of polishing and increasing of gloss as well as for thermal treatment of impregnated concrete - powerful 7,5 kW / 400 V Motor - height-adjustable handle - automatic tensioning system of the V-belt drive - high quality frequency converter for rotation speed adjustment 0-2500 min-1 - extreme daily output due to the large working width and high engine power - polishing of large surfaces with diamond-impregnated DRS-HiSpeed-PADs - priming and increasing of effectiveness of DRS-FLOOR® lithium-based concrete treatments - improvement of DRS-FLOOR® concrete hardness and wear resistance due to thermal treatment of the surface - surface gloss improvement Applications UNIVERSAL SINGLE-DISC MACHINES Universal cleaning and polishing machine CT43+ INCLUDED WITH DELIVERY: - water tank - standard PAD-drive plate Ø380 mm (for PADs up to Ø410 mm) - scrub brush Ø410 mm (medium hard; PPN 0,75 mm) - scrub brush Ø410 mm (soft; PPN 0,45 mm) - removable weight (14 kg) - connection cable (12 m with kink protection) High-torque single-disc machine with a working width of 410 mm and a robust, maintenancefree drive system for exceptionally smooth running, long service life and optimum performance. Optimally suitable for various dry and wet cleaning work as well as for dispersion of DRS-FLOOR concrete treatment in concrete floors. - maintenance-free and robust transmission - ergonomically height adjustable handle with hand protection - tool change without additional tools - long 12 m connection cable with kink protection - extensive accessories included - for processing of wood, stone, tile, carpet and concrete floors CT43+ DBB-700 Motor 1,8 kW / 230 V 7,5 kW / 400 V Grinding width [mm] 380-430 700 Rotation speed [min-1] 168 0 - 2500 Ø-vacuum connection [mm] - 50 Weight [kg] 45 + 14 160 Price [€] 1.280,00 6.600,00 PAD-drive plate Ø410 mm with Dom-increase (for PADs up to Ø430 mm) 98,00 - Recommended tools DRS-Clean-N-PAD DRS-Clean-S-PAD DRS-Clean-S-PAD DRS-HiSpeed-PAD

15 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. Applications Product-Highlights Industrial floor renovation / refurbishment: - quick exposing of aggregate - removal of old coatings - roughening for recoating - leveling Road construction / infrastructure: - add non-slip texture to roads, pavements and public areas - renovate, level and texture weathered surfaces Architecture - achieve high grip surface with “shot blasted” appearance - dust and splash-proof housing - optimally matched sealing elements - optimized carbide picks design - fully protected ball bearing - compatible with most floor grinders - create uniform textured surface without grooves or tramlines - makes your grinding machine to all-in-one solution DRS-MILL Tool diameter [mm] 45 Compatible with DBS-520-3H DBS-620-4H DBS-820-3H DBS-820-4H Price DRS-MILL milling head (1 pcs.) [€] 144,00 Price of conversion kit for grinding machines1 DBS-520-3H [€] 890,00 DBS-620-4H [€] 490,00 DBS-820-3H [€] 540,00 DBS-820-4H [€] 690,00 1 without DRS-MILL heads DRS-MILL - the most efficient and non-destructive way of material removal DRS-MILL: INNOVATIVE FLOOR MILLING TECHNOLOGY

16 DRS-LOCK ADAPTER - universal design for nearly all grinding machines - extremely strong fixation of the grinding tool and tool replacement within seconds - 2 ways of fixation of DRS-LOCK adapter on the tool holder with only 3 M6 screws: Option A: with nut from the back side of the through bore-hole Option B: with M6 thread produced in tool holder plate - fastenings included in scope of delivery - height approx. 8 mm - can be used with all DRS-LOCK grinding and milling tools GS-PCD-R GS-PCD-H Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. GS-PCD-R / GS-PCD-H PCD-Xpert-2R / PCD-Xpert-1R / PCD-Xpert-2H / PCD-Xpert-1H - for removal of various coatings, adhesives, sealing, colors, soft screeds - with 2 high performance PCD picks - DRS-LOCK tool fastening system - GS-PCD-R with round PCD picks for harder coatings, less aggressive - GS-PCD-H with sharp PCD picks for thick, elastic coatings, most aggressive - high-performance PCD-picks for effective coating removal - special-shaped support segments with PCD-split - DRS-LOCK tool fastening system PCD-Xpert-2R with 2 round PCDs: removal of hard coatings with heavy grinding machines PCD-Xpert-1R with 1 round PCD: removal of hard coatings with middle-weight grinding machines PCD-Xpert-2H with 2 sharp PCDs: removal of soft, elastic coatings with heavy grinding machines PCD-Xpert-1H with 1 sharp PCD: removal of soft, elastic coatings with middle-weight grinding machines Price [€] / Part number left-running machines1 right-running machines2 PCD-Xpert-2R 146,00 (PCD-Xpert-2R L) 146,00 (PCD-Xpert-2R R) PCD-Xpert-1R 96,00 (PCD-Xpert-1R L) 96,00 (PCD-Xpert-1R R) PCD-Xpert-2H 132,00 (PCD-Xpert-2H L) 132,00 (PCD-Xpert-2H R) PCD-Xpert-1H 86,00 (PCD-Xpert-1H L) 86,00 (PCD-Xpert-1H R) Price [€] left-running machines1 GS-PCD-R 84,00 GS-PCD-H 84,00 1 anticlockwise looking from the bottom on the tool holder Price [€] DRS-LOCK ADAPTER 38,00 1 anticlockwise looking from the bottom on the tool holder 2 clockwise looking from the bottom on the tool holder PCDXpert-2R PCDXpert-1R PCDXpert-2H PCDXpert-1H L R R L PCD-MILLING TOOLS Universally adapted for machines from other manufacturers

17 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. RAZOR - revolutionary grinding segment for previously unattainable removal rate on hard concrete floors DRS-3DP-C20...120 - new generation of our bestseller DRS-2DS in new design and with many technical advantages Grinding plate with 3 round high-performance diamond segments Ø18x12 mm - significantly faster removal speed with superior tool life due to a new segment specification - full aggregate exposing in less grinding steps - optimal pressure distribution on 3 grinding segments for an equal floor finish - top rounded segments for best grinding performance from the very beginning - segment height 12 mm - customization of the segment specification for special requirements possible - DRS-LOCK fastening system RAZOR-C20...C120 / DRS-3DP-C20...120 DRS-2DS-C16 / DRS-2DS-A6..120 Grinding plate with 2 high performance diamond segments 40x10x10 mm - available in numerous segment specifications for various applications - adaptation of the segment specification to the special requirements possible - Segment height 10 mm - DRS-LOCK fixing system Diamond grit / Application Concrete, hard stone floors Abrasive, soft stone floors RAZOR hard concrete Ultra coarse / for removing of coatings and thicker concrete layers (soft, abrasive concrete only!) - DRS-2DS-A6 - Extra-coarse / for coarse grinding jobs and for removal of coatings DRS-2DS-C16 DRS-2DS-A16 - Rough grinding / quick material removing, roughening of surface DRS-3DP-C20 DRS-2DS-A20 RAZOR-C20 Medium rough / planing of surface, removing of larger scratches DRS-3DP-C40 DRS-2DS-A40 RAZOR-C40 Medium fine / grading of the surface, removing of smaller scratches DRS-3DP-C60 DRS-2DS-A60 RAZOR-C60 Fine / fine grinding of preprocessed surface DRS-3DP-C80 DRS-2DS-A80 RAZOR-C80 Extra fine / final finish for perfect surface DRS-3DP-C120 DRS-2DS-A120 RAZOR-C120 Price [€] 74,00 € 74,00 € 90,00 € Grinding plates 2DS-U..X - universal for concrete and different stone floors - segment height 8 mm - available in 5 grits (diamond size) - DRS-LOCK fixing system with 2 diamond segments 40x8x8 mm 2DS-U16X 2DS-U20X 2DS-U40X 2DS-U60X 2DS-U120X U16X rough grinding, excellent productivity in softer concrete types U20X rough grinding, excellent productivity in harder concrete types U40X medium grinding for smooth surfaces U60X final grinding for fine surfaces without scratches U120X extra fine grinding for excellent surfaces 54,00 € 50,00 € 46,00 € 46,00 € 46,00 € GRINDING TOOLS WITH METAL BOND extreme removal rate

18 DRS-ShineMaster-Concrete 50# - 3000# DRS-HybridMaster-Concrete 50# - 3000# DRS-CeramMaster-Concrete 50# - 200# Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. - innovative resin bond polishing pads - effective working height 12 mm - excellent surface quality (deep gloss, no sanding marks) - excellent grinding performance well above the market standard - color-neutral version of the polishing pad prevents the discoloration of the ground - fastening by Velcro - available in grit sizes 50#, 100#, 200#, 400#, 800#, 1500#, 3000# - suitable for concrete, terrazzo and hard floors - special Hybrid-tool with metal/resin bond - effective working height 12 mm - effective removing of scratches during the intersection from metal to resin bond grinding tools - much better tool life compared to resin tools - fixation by Velcro - available grits 50#, 100#, 200#, 400#, 800#, 1500#, 3000# - suitable for concrete, terrazzo, hard stone floors - special hybrid-tool with metal/ceramic-bond - allows skipping of grinding steps, e.g. from metal #40 directly to resin #100 - effective removal of scratches during the intersection from metal to resin grinding tools - effective working height 12 mm - fixation by Velcro fastener - available in grits 50#, 100#, 200# - concrete floors, terrazzo, hard floors, selective natural stone Diameter [mm] Grit size Price [€] DRS-ShineMaster-Concrete 80 50#, 100#, 200#, 400#, 800#, 1500#, 3000# 28,00 DRS-HybridMaster-Concrete 80 50#, 100#, 200#, 400#, 800#, 1500#, 3000# 38,00 DRS-CeramMaster-Concrete 80 50#, 100#, 200# 36,00 - for removing of scratches - hybrid metal resin bond High removal rate! Less grinding steps! Removes all scratches! POLISHING TOOLS WITH RESIN BOND

19 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. DRS-Clean-N-PAD DRS-Clean-S-PAD DRS-HiSpeed-PAD DRS-Shine-PAD Universal cleaning-PADs for slow running single-disc machines (max. 150 min-1) - high holding capacity of dirt, long lifetime, thickness approx. 22 mm - adapted for PVC, polymers, natural and artificial stone, tiles, concrete, parquet, wood - available as: white (soft) - for polishing and surface gloss improvement red (medium)- for cleaning (also wet) green (hard) - for rough surface cleaning High performance-PADs for fast running single-disc machines - usable up to approx. 3000 min-1 - variable material-mix (synthetic fibres / natural bristles) - low friction heat - suitable for nearly all floors - available as: Nature light - for hard floors Nature medium - for medium hard floors Nature - for soft floors Diamond-impregnated PADs for polishing of concrete and other hard stone floors Special PADs with partial diamond coating for achieving a consistent gloss on uneven surfaces and for the processing of heavy accessible areas - even surface gloss due to high PAD-flexibility - complete upper PAD-layer is impregnated with diamonds - extremely great daily output achievable - optimal for post-treatment of DRS-FLOOR® concrete care products with DBB-700 - stepwise polishing of the surface due to diamond grit gradation (#400, 800, 1500, 3000) - better polishing result on uneven surfaces than with resin PADs - aggressive polishing process due to high diamond concentration - stepwise polishing of the surface due to diamond grit gradation (#200, 400, 800, 1500, 3000) available grits #400, 800, 1500, 3000 available grits #200, 400, 800, 1500, 3000 POLISHING PADS Ø [mm] DRS-Clean-N-PAD DRS-Clean-S-PAD DRS-HiSpeed-PAD #400, 800, 1500, 3000 DRS-Shine-PAD #200, 400, 800, 1500, 3000 170 - - - 68,00 € 250 - - 48,00 € 110,00 € 410 15,001 € 18,001 € - - 510 22,001 € 26,001 € 530 24,001 € 28,001 € - - 685 - 52,001 € 140,00 € - Applicable with CT43+ CT43+ DBB-700 DBS-250 DBB-700 DHP-175NT DBS-250 1 Minimum order quantity 5 pieces

20 HSM 125 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. Hand polishing machines DHP-125NT / DHP-175NT Lightweight, easy-to-use hand-held grinding machine for edge and corner processing with diamond- and PCD-tools. Also for wall and overhead applications suitable. Innovative hand polishing machines with stepless adjustable rotation speed for dry and wet polishing of concrete and other kinds of stone - large range of rotation speed - water connection for wet polishing - dust extraction outlet for dust free dry grinding - serial PRCD - flexible protective cover for adjustment of working height - removable segment in protective cover for processing of corners - electronic speed control, soft-start and overload protection - applicable for corners and edges, inaccessible for big grinding machines - infinitely variable rotation speed for optimal adaptation of tool to processing material - applicable for PCD-tools due to high motor power - dust extraction outlet for dust free processing (connection for industrial dust extractor) - perfect up-to-edge work due to removable segment of the brush ring HSM 125 DHP-125NT DHP-175NT Tool diameter [mm] 125 125 175 Tool fixation 22,2 mm / M14 22,2 mm / M14 22,2 mm / M14 Motor 1,4 kW / 230 V 1,2 kW / 230 V 2,2 kW / 230 V Rotation speed [min-1] 4000-9000 2100-4300 1000-2400 Weight [kg] 3,6 2,9 5,8 Price [€] 920,00 290,00 390,00 Suitable for: PCD-grinding tools ++ - - Metal bond grinding cup wheels ++ + + Resin bond polishing PADs + ++ ++ universal hand grinder with variable rotation speed DHP-125NT DHP-175NT HAND MACHINES

21 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. ST-PCD-U ST-PCD-R ST-PCD-H Ø PCD amount Price [€] height [mm] PCD amount Price [€] height [mm] PCD amount Price [€] height [mm] 100 9 94,00 - - - - - - - 115 9 98,00 20 - - - - - - 125 12 121,00 19 6 140,00 21 5 229,00 22 175 18 176,00 27 9 206,00 29 9 408,00 29 ST-PCD U/R/H Ø115 - 175 mm vmax 80 m/s PCD grinding cup wheels with polycrystalline diamond Grinding cup wheels with metal bond - for removing of various coatings, adhesives, sealings, colors, soft screeds - with high performance PCD picks ST-PCD-U ST-PCD-R ST-PCD-H ST-PCD-U with small round PCD picks for universal purpose, less damages of processed surface, optimal for thin layers ST-PCD-R with large round PCD picks for harder coatings, aggressive ST-PCD-H with sharp PCD picks for thick, elastic coatings, extremely aggressive STT-G / M / F DRS-Flex- PAD Adaptor M14 Ø Price [€] Price [€] Price [€] 100 92,00 - 36,00 125 104,00 36,00 40,00 150 139,00 - - 175 - - 80,00 180 180,00 - - Ø100 - 180 mm vmax 80 m/s STT-F STT-M STT-G DRS-Flex-PAD Special diamond cup wheels with graded diamond grits for processing of corners and difficult accessible areas Resin polishing PADs for handheld grinding machines for processing of corners and difficult accessible areas - special resin bond for long lifetime - stepwise polishing of surface due to diamond grit gradation - available grits #50, 100, 200, 400, 800, 1500, 3000 Adapter M14 for DRS-Flex-PAD G - Rough grinding M - Medium grinding F - Fine grinding grit #40 (green) grit #80 (blue) grit #120 (yellow) TOOLS FOR HAND MACHINES

22 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. DBF-200-E230 / DBF-200-E400 / DBF-200-B DBF-250-E400 / DBF-250-B Light and handy floor milling machine with electric (E230 / E400) or petrol (B) engine with a grinding width of 200 mm and excellent maneuverability can be optimally used for processing of small areas and difficult-to-access places. Universal and powerful floor milling machine with electric (E400) or petrol (B) engine with a grinding width of 250 mm and an optimal proportion between weight and performance. The working depth can be preset via quick-lowering mechanism in a few seconds and be adjusted infinitely variable by wheel. The user-friendly design allows the replacement of the drum on the construction site in less than 5 minutes and guarantees comfortable maintenance and operation. Milling drum MD-250/6 with its 6 hardened axles takes a variety of different milling and peeling tools DBF-200-E230 DBF-200-E400 DBF-200-B DBF-250-E400 DBF-250-B DBF-250-TWIN DBF-380 TWO-IN-ONE Working width [mm] 200 200 200 250 250 250 350/380 Engine 2,2 kW 230 V 2,2 kW 400 V Honda GX160 4,0 kW 4,0 kW 400 V Honda GX270 6,3 kW 2 x motors 4,6 kW / 400 V 15,0 kW 400 V Recommended milling depth [mm] 0 - 3 0 - 4 0 - 3 0 - 5 0 - 5 0-10 >10 Distance to wall [mm] 40 40 40 60 60 60 Ø-vacuum connection [mm] 50 50 50 70 70 70 80/100 Length [mm] 1050 1050 1050 1270 1270 1700 1700 Width [mm] 370 370 370 460 460 470 650 Height [mm] 1020 1020 1020 1220 1220 1100 1300 Weight [kg] 68 80 72 135 150 286 ≈500 Price incl.: [€] 2.490,00 2.490,00 2.690,00 4.100,00 4.700,00 9.800,00 25.490,001 Milling drum MD-200/4 TWIN MD-200/4 TWIN MD-200/4 TWIN MD-250/6 MD-250/6 2x MD-250/6 - Milling tools HM5-45/6 HM5-45/6 HM5-45/6 HM6-57/6 HM6-57/6 HM6-57/6 - Spare milling drum (incl. axles, without tools) [€] 284,00 284,00 284,00 550,00 550,00 2x 550,00 1.080,00 MD-200/4 TWIN MD-200/4 TWIN MD-200/4 TWIN MD-250/6 MD-250/6 2x MD-250/6 MD-350/5 TWIN Set of spare axles [€] 34,00 (4 pieces) 34,00 (4 pieces) 34,00 (4 pieces) 64,00 (6 pieces) 64,00 (6 pieces) 2x 64,00 (12 pieces) 178,00 (5 pieces) DBF-200-E230 DBF-200-E400 DBF-200-B DBF-250-E400 DBF-250-B Milling drums MD-200/4 TWIN and MD-350/5 TWIN have two installation positions for their 4 hardened axles and therefore assure a double life Milling drum MD-250/6 with HM6-57/6 FLOOR MILLING MACHINES / SCARIFIERS 1 without drum and diamond cutting blades

23 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. GENERAL TECHNICAL DESCRIPTION: - conversion from the milling drum to diamond blades within a few minutes - height-adjustable handle with vibration damping for fatigue-free working - feed drive via an electro-hydraulic variator with separate electric motor - automatic star-delta start with phase monitoring - comfortable cutting depth adjustment via easily accessible hand wheel - LED lighting of the working area for comfortable operation - industrial vacuum connection with Ø80 or Ø100 mm for dust-free operation - comfortable and fast tool replacement - powder coated components for a long service life Due to conversion of the DBF-380 for cutting with diamond blades concrete layers of larger thicknesses can be removed economically and quickly Cutting width up to 380 mm!!! Cutting depth up to 30 mm!!! DBF-380 TWO-IN-ONE Double drum floor milling machine DBF-250-TWIN Innovative and extremely powerful floor milling machine with 15 kW electric motor, electro- hydraulic feed drive (stepless adjustable speed forwards/backwards), height-adjustable handle and quick-lowering mechanism. Due to its enormous power, this machine is particularly suitable for difficult milling jobs on hard concrete floors as well as for large-scaled projects. Strong design of all machine‘s components ensure long life and highest reliability even under the most demanding working conditions. DUAL FUNCTION: - milling with carbide drum of 350 mm width - cutting with up to 80 diamond blades up to 380 mm total width and up to 30 mm cutting depth!!! Working sequence for removing centimeter thick concrete layers: - cutting with a set of diamond blades, assembled with about 10 mm distance between them - milling of remaining concrete bars with carbide drum cross to the cutting direction of the diamond blades - for larger removal depths these steps can be repeated several times Each of the two drums of this innovative milling machine is driven by one powerful motor 4,6 kW/400 V. Two opposite rotating drums ensure not only a double removal performance, but also increase the effectiveness of the dust extraction. With the peeling wheels SR-57/19 mounted on the first drum and with millings tools HM6-57/6 mounted on the second drum, the machine can remove a coating, clean the surface and prepare it for re-coating in only one single operation. The integrated electro-hydraulic feed motion system ensures easy operation and extremely high daily production rates. Due to its long wheel base DBF-250-Twin is optimal suitable for levelling of uneven surfaces. SM-TS-280-B / SM-TS-280-BW / SM-TS-280-BWW - special saw blade Ø280 mm for DBF-380 - power P 10 - 20 kW - special triangle bore - segment height 10 mm - concrete, coatings - SM-TS-280-B improved tool-life for soft concrete - SM-TS-280-BW faster cutting speed in hard concrete - SM-TS-280-BWW soft bond for extremely hard concrete floors Price [€] SM-TS-280-B / BW / BWW 136,00 SM-TS-280-B28 / BW28 / BWW28 (Set with 28 pcs.) 3.808,00 FLOOR MILLING MACHINES / SCARIFIERS NOW REQUEST THE SPECIAL CATALOG FOR DBF-380!

24 Price per piece, ex works. Our general conditions are valid. For articles marked with the conditions for machines are valid. Tool (Diameter x Bore x Width) Picture Description Unit price [€] Drum‘s configuration (Qnty milling tools / qnty spacers) Price refill set (incl. spacers) [€] Price complete drum with tools [€] DBF200 DBF250 DBF- 380 HM5-45/6 45x15x6 mm - 5 high-quality carbide peaks - smooth removal 1,90 80/92 164,00 472,00 HM6-45/6 45x15x6 mm - 6 high-quality carbide peaks - high performance 2,77 80/92 244,00 554,00 SL-42/2 42x15x2 mm - made of premium alloyed steel - removal of rust, dirt, thin coatings 0,59 336/0 218,00 528,00 SR-40/11 40x15x11 mm - 5 high quality carbide cutters -very aggressive while removal of coatings 19,65 44/88 886,00 1.230,00 SR-40/22 40x15x22 mm - 5 high quality carbide cutters - smooth removal of coatings 30,76 20/108 642,00 974,00 HM6-57/6 57x18x6 mm - 6 high quality carbide peaks - smooth removal 3,27 126/246 446,00 1046,00 HM8-57/6 57x18x6 mm - 8 high quality carbide peaks - high performance, increased tool life 5,74 126/246 846,00 1.466,00 SR-57/19 57x18x19 mm - 6 high quality carbide cutters - smooth removal of coatings 31,06 36/252 1.180,00 1.818,00 HM8-80/8 80x30x8 mm - 8 high quality carbide peaks - high performance 7,50 105/2151 135/1552 924,001 1.110,002 2.106,001 2.300,002 HM12-80/8 80x30x8 mm - 12 high quality hard metal sheaths - smooth removal 9,98 105/2151 135/1552 1.186,001 1.446,002 2.382,001 2.670,002 SR-80/19 80x30x19 mm - 6 high quality carbide cutters - very aggressive while removal of coatings 47,10 on request SR-80/39 80x30x39 mm - 6 high quality carbide cutters - smooth removal of coatings 83,79 on request DS-24/2,5 24x13x2,5 mm hardened spacer for DBF-200 and DBF-250 0,26 DS-50/4 50x23x4 mm hardened spacer for DBF-380 0,64 TOOLS FOR FLOOR MILLING MACHINES 1 coarse milling drum MD-350/5 G 2 fine milling drum MD-350/5 F

RkJQdWJsaXNoZXIy MjY5